Thermo insulating Panels

1. Pre-varnished zinc-plated sheet, pursuant to EN 10346 , EN 10143 si EN and  EN 10169-1.Standard, plisse, lis micro profiling.
2. The core: PUR or PIR polyurethane foam (harmless and non-injurious ).
3. Sealing pad: gives good thermo insulation and joint sealing.
4. Collared drywall screw and EPDM pad.
5. Padded cap. 

   
   
   Sizes and si mass-table loads.
   Tolerable loadings according to distance between „L” frames, in kg/sqm:
   K- coefficient of heat transfer

   
   K –coefficient of thermo transfer
   Standard panel length ranges between  2 and 13.5 m. Panels up to a  maximum 15m length or shorter than 2m can be manufactured only by previously consulting  the technical department.
   Size limits pursuant to EN 14509-2007:

   

1. Pre-varnished zinc-plated sheet, pursuant to EN 10346 , EN 10143 si EN and  EN 10169-1.Standard, plisse, lis micro profiling.
2. The core: PUR or PIR polyurethane foam (harmless and non-injurious ).
3. Sealing pad: gives good thermo insulation and joint sealing.
4. Collared drywall screw and EPDM pad.
5. Padded cap
   
   
   Sizes and si mass-table loads.
   Tolerable loadings according to distance between „L” frames, in kg/sqm:
   K- coefficient of heat transfer

   
   K –coefficient of thermo transfer
   Standard panel length ranges between  2 and 13.5 m. Panels up to a  maximum 15m length or shorter than 2m can be manufactured only by previously consulting  the technical department.
   Size limits pursuant to EN 14509-2007:
   

IsoFrig panels are designed for applications  with temperatures ranging from -40 °C to  0°C.
Ranges of use: freezing and refrigerating chambers, food processing, applications with strict hygienic conditions.

1. FI zinc-plated sheet panel pursuant to EN 10346 , EN 10143 si EN 10169-1 provided with the following  finishings : PES 15-25 microns, ester lacquer finish, PVC food foil, other alternatives (PVDF, etc). Micro profiling: STANDAD, LIS.
2. FE panels with the following finishings: PES: 15-25 microns, ester lacquer finish, PVC food foil, other alternatives (PVDF, etc).

3. The core: PUR and PIR polyurethane foam (harmless and non-injurious ).

Sealing of panel joining:
– fitting  provides thermo insulation  ;
– freezing chambers and storing freezing chambers requirements fully met.

Sizes and si mass-table loads.
Tolerable loadings according to distance between „L” frames, in kg/sqm:
K- coefficient of heat transfer

Standard panel length ranges between  2 and 13.5 m. Panels up to a  maximum 15m length or shorter than 2m can be manufactured only by previously consulting  the technical department.
Size limits pursuant to EN 14509-2007:

Pre-varnished zinc-plated sheet, pursuant to EN 10346 ,  EN 10143 and EN 10169-1. STANDARD micro profiling.

1. 1. The core: PUR or PIR polyurethane foam (harmless and non-injurious ).
   2. Sealing pad: gives good thermo insulation and joint sealing.
   3. Collared drywall screw and EPDM pad.
   4. Panel for 7% down-grade roofs (maximum down-grade as specified in the project).
   5. Padded cap

   
   
   Sizes and si mass-table loads.
   Tolerable loadings according to distance between „L” frames, in kg/sqm:
   K- coefficient of heat transfer

   
   Standard panel length ranges between  2 and 13.5 m. Panels up to a  maximum 15m length or shorter than 2m can be manufactured only by previously consulting  the technical department.
   Size limits pursuant to EN 14509-2007:

   

Panel for 7% down-grade roofs (maximum down-grade as specified in the project)

1. Pre-varnished zinc-plated sheet , pursuant to EN 10346 ,  EN 10143 and  EN 10169-1. STANDARD micro profiling.
2. The core: PUR or PIR polyurethane foam ( harmless and non-injurious ).
3. Sealing pad: gives good thermo insulation  and joint sealing.
4. Collared drywall screw and EPDM pad.
5. Padded cap