Roof thermo insulating panel – 3ribs

Pre-varnished zinc-plated sheet, pursuant to EN 10346 ,  EN 10143 and EN 10169-1. STANDARD micro profiling.

    1. The core: PUR or PIR polyurethane foam (harmless and non-injurious ).
    2. Sealing pad: gives good thermo insulation and joint sealing.
    3. Collared drywall screw and EPDM pad.
    4. Panel for 7% down-grade roofs (maximum down-grade as specified in the project).
    5. Padded cap



    Sizes and si mass-table loads.
    Tolerable loadings according to distance between „L” frames, in kg/sqm:
    K- coefficient of heat transfer


    Standard panel length ranges between  2 and 13.5 m. Panels up to a  maximum 15m length or shorter than 2m can be manufactured only by previously consulting  the technical department.
    Size limits pursuant to EN 14509-2007: